New Roads is a small town, and the housing stock reflects that. Older homes on original wiring sit alongside newer builds, and the mix creates a wide range of electrical needs on the same street. A house built decades ago may still carry wiring that was installed under standards long since updated. A newer home may need additional circuits as the household grows. The job changes depending on what is behind the walls, and that is where the conversation starts.
We handle electrical repair and installation throughout New Roads and the surrounding area. Whether the work is a failing outlet in a house that has been in the family for generations, a panel that can no longer carry the load, or a dedicated circuit for new equipment, we scope it on the call and confirm the price before anything is scheduled. We are open every day from 8:00 AM to 8:30 PM.
Call (225) 592-3659.
Some faults show up clearly. A breaker trips and stays tripped. An outlet is dead. A fixture does not come on. Those are straightforward to locate. The harder calls are the ones where the fault is intermittent, where the symptom appears under specific conditions and disappears before anyone can trace it.
A circuit that holds up under normal use but trips when the load peaks is a different problem from one that fails at random. A fault that only appears when it rains points toward a moisture intrusion somewhere in the wiring path. An outlet that works most of the time but loses power when a particular appliance runs elsewhere in the house is following a pattern, but the pattern is not always obvious from the symptom alone.
Finding this kind of fault is its own job. It requires working through the circuit methodically, testing under the conditions that produce the failure, and ruling out causes before settling on one. We explain what we are finding at each step so you know what the diagnostic is turning up, not just what the repair will cost.
Careful diagnosis. Code-compliant work. Professional service.
Not every electrical problem in a home sits on the customer's side of the meter. The service entrance, the meter base, and the conductors running from the utility pole to the weatherhead belong to the utility. When a fault traces back to that equipment, the repair path changes.
We work through the diagnostic the same way regardless of where the fault ends up. If the evidence points to the service entrance or the meter, we identify that clearly and explain what it means. From there, the utility company is the right call, and we can tell you what to report and what to ask for so the conversation with them starts in the right place.
If the fault is partly on the customer's side and partly on the utility's, we handle our portion and document what falls to them. The goal is a clear picture of what needs to happen and who handles each part of it.
In older homes in this part of Louisiana, panels are often in a utility room, a hallway, a detached garage, or in some cases an exterior enclosure. The location matters because access affects how long the visit takes and what has to be moved or cleared before the work can begin.
A panel in a garage with storage stacked in front of it takes longer to reach than one on an open wall. A panel in a tight utility closet may need the door removed to work safely. None of these are obstacles, but knowing about them on the call helps us give you an accurate scope before we arrive.
The two things that help most are clear access to the panel and a straightforward account of what the problem is doing. If furniture, boxes, or stored items are in front of the panel, moving them before the visit saves time on both ends. If the fault is intermittent, a note on when it happens and what was running at the time gives the diagnostic a starting point.
We show up ready to work. The clearer the picture on the call, the faster the fault gets found.
The price on any electrical job depends on what the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change. A straightforward outlet replacement is priced differently from a circuit that has to be traced through finished walls. A panel upgrade that requires a service entrance change involves more than one that does not.
We do not quote a number before we understand the job. That applies whether the call is about a single outlet or a full rewire. When we scope the job on the phone, we ask enough questions to give you a price that reflects what the work actually involves.
Call (225) 592-3659, describe what you are seeing, and we will go through it with you.
The price is confirmed before anything is scheduled. If the diagnostic turns up something beyond the original scope, we explain it and give you a new price before proceeding. You are not agreeing to anything until you know what it costs.
Reach out and we will get it diagnosed.
Electrical work like this comes up more than people expect in a town where the housing stock spans several decades. The jobs below come up regularly in New Roads, and each one starts the same way: a call, a scope, a confirmed price.
Older homes frequently have grounding systems that were installed to earlier standards or that have degraded over time. Grounding and bonding corrections bring those systems up to current requirements. This is not cosmetic work. A properly grounded system is what allows a fault to clear safely rather than building heat or voltage at a point where it can cause damage.
Kitchens, bathrooms, garages, and exterior outlets require GFCI protection under current code. AFCI protection is required on most bedroom and living area circuits in newer installations and is often added during rewire or panel work on older homes. If your home was built before these requirements were standard, the outlets and breakers protecting those areas may not meet current code. We address both as part of outlet work, panel upgrades, and circuit corrections.
Recessed lighting and LED fixture installation changes how a room functions. We run the circuits, install the cans or fixtures, and confirm the switch configuration works the way it should. Where a dimmer is part of the plan, we make sure the fixture and the switch are compatible before the job is done.
A ceiling fan installation is straightforward when the box in the ceiling is rated for a fan and a switch exists. When neither is true, the job involves running a new circuit and installing a fan-rated box before the fixture goes up. We handle both versions. If you are replacing an existing fan, we check the box rating before the new one goes up.
In older homes, panel labels are often wrong, incomplete, or missing entirely. A panel where no one knows which breaker controls which circuit is a problem during a repair and a hazard during an emergency. We trace and label circuits accurately so the panel reflects what is actually in the house. This is useful on its own and essential before any panel upgrade or rewire.
Outdoor living is part of the rhythm of this region, and exterior lighting extends how a property gets used after dark. We install security lights, motion sensor lights, landscape lighting, and weatherproof exterior outlets. Every outdoor circuit is grounded and GFCI-protected, because exposure to weather makes proper installation more critical, not less.
Electrical work like this comes up more than people expect, and not always at a convenient moment. We take calls every day from 8:00 AM to 8:30 PM, and when a problem will not wait, we work with you on timing when you call. Describe the situation and we will tell you what the schedule allows.
For tenants and businesses that need to stay operational, we plan around the work. If a circuit has to be de-energized, we confirm which areas will be without power and for how long before the visit starts. If the job can be staged to keep part of the space running, we work it that way.
Electrical work here gets handled by people who answer to this community. When you call, you reach someone who can scope the job on the phone and tell you what to expect from the visit. Clear communication from the first call to the final test is how every job runs.
Pick up the phone and we will get rolling.
New Roads is the center of what we cover in this area, and we serve the surrounding communities in Pointe Coupee Parish as well. If your property is in Ventress, Morganza, Livonia, or Erwinville, the process is the same: call, describe the job, get a price before anything is scheduled.
We also cover St. Francisville to the east. If you are not sure whether your address falls within our area, call and give us the location. We confirm coverage on the call. The specifics for a job like this are on our list of electrical services.
We work from what is visible: the panel, the outlets and switches, the fixture locations, and any accessible wiring. For a full inspection or a rewire, we trace circuits to build a working picture of how the property is wired. A circuit map can be produced as part of that process.
The electrical work is similar, but apartments often have shared panels, limited access to the building's main service, and building management protocols that affect what can be done and when. We confirm the access arrangements and any building requirements on the call before scheduling.
We do. Cleanup is part of the job, not an extra step. On a multi-day project, the work area is tidied at the end of each day so the property stays usable between visits.
Older homes in this part of Louisiana often carry wiring that was installed under earlier code standards, including knob-and-tube runs, aluminum branch circuits, and panels that were not designed for the loads a modern household puts on them. We work through the diagnostic carefully and explain what we find before recommending any repair or upgrade. If the home has not been looked at in years, an inspection is a good starting point.
We tell you what was checked, what was ruled out, and what the next diagnostic step involves. Some faults, particularly intermittent ones, take more than one visit to pin down. We do not charge for work that was not done, and we explain the situation clearly before scheduling a follow-up.
Yes. We assess what has been done, confirm what remains, and give you a price for completing the work before we schedule anything. We do not assume the existing work is correct simply because it was started by someone else.
Describe what you are seeing and we will scope it on the phone. The price is confirmed before anything is scheduled, and the work runs from the first call to the final test. We are open every day from 8:00 AM to 8:30 PM.
Call (225) 592-3659 to get a quote.
We will tell you what the schedule allows and get the visit set up from there.
Wiring and panel work covers these nearby towns as well: Jackson, Baker, Brownfields, Port Allen. Browse our coverage list.
From a tripped breaker to a full panel upgrade, we handle the complete range of electrical work for homes and businesses in New Roads and Pointe Coupee Parish. The table below breaks down each service by what it covers, who it fits best, and a practical detail worth knowing before you call. Every job is scoped on the phone before anything is scheduled, and the price is confirmed before work begins.
| Service Type | What's Included | Common Situations | Good to Know |
|---|---|---|---|
| Ceiling Fan Installation | New wiring from scratch where no box exists, Fixture-to-fan swap on an existing box, Fan-rated box installation, Switch and remote wiring | Homeowners replacing a light fixture with a fan or adding a fan to a room without existing wiring | A standard light box is not rated to support a ceiling fan. If the existing box is not fan-rated, we swap it as part of the installation rather than leaving it as a future problem. |
| Electrical Panel & Service Upgrades | 100-amp to 200-amp service upgrades, Full panel replacement, Subpanel installation, Meter base and service entrance work | Homeowners adding an EV charger, generator, major appliance, or home addition that pushes past the current panel capacity | A load calculation tells us whether the existing service can carry the new demand before any panel work is quoted. We run that on the call. |
| Lighting Installation | Recessed and LED lighting, Pendant and surface-mounted fixtures, Under-cabinet lighting, Exterior, security, and motion sensor lights | Homeowners updating interior lighting or adding outdoor lighting for security and curb appeal | Exterior lighting in New Roads gets year-round use. Fixture placement and circuit load are worked out before we start so the finished result matches how the space is actually used. |
Call (225) 592-3659 and we will go through your job, give you a straight answer about what it involves, and confirm a price before anything is scheduled.
(225) 592-3659